C5 BASE Roof Spoiler Duckbill
This Base model roof spoiler features a slight upward shape creating a "duckbill" style
Adds JDM style aero
Hides dot matrix tint issues
Utilizing the best 3D scanning equipment and CAD software we have designed The ONLY roof mounted spoiler on the market dedicated for C5 Corvettes
Comes standard in fiberglass (FRP) with primer finish
Carbon fiber (CFRP) finish is clear coated and requires no finishing
NO drilling required
Mounts using 3M VHB tape. (Not provided)
Spoiler Specs:
Width: 12"
NOTE: While we have utilized 3D scanning technology to get as close to perfect tolerances as possible, this part may require adjusting your C5 hatch hinges to allow the hatch to open without causing rubbing on the corners of the roof spoiler. The gap between the "halo" bar and roof spoiler when fully open are very tight and can very based off age of vehicle. Please test fit and make appropriate modifications to ensure clearance if needed before painting or wrapping.
Some customers are able to use the roof spoiler with no modifications needed, while others have needed modifications to ensure no rubbing when fully open. Customers have had success with the following steps.
- Adjusting the hatch hinges. Please check out our youtube video on how to adjust your C5 hatch with a few simple steps. WATCH YOUTUBE VIDEO
- Slight sanding may be required to clearance the spoiler.
- Shorter gas struts to limit maximum hatch opening clearance.
Please note: While we utilize 3D scanning to to get as close to OEM fitment as possible, all parts should be installed by a professional to ensure desired fitment.
FRP aero parts require fitment and paint prep. It is not uncommon for FRP parts to have slight imperfections like hairline cracks, blemishes, slight chipping and do not constitute as damaged requiring refund/exchange. If you have questions please email returns@antiboomermfg.com
Carbon fiber parts (CFRP) may have slight imperfections to the finished surface which can be repaired with slight sanding and resurfacing and are not considered damaged. If you believe your CF part is damaged from manufacturing to include failed or improper CF weave pattern, please send us an email for exchange with photos of the defective/damaged part to returns@antiboomermfg.com
All aero parts are designed for show vehicles and off road use. ABMFG is not responsible for damages to your vehicle or anyone else's vehicle from installation of our products. All products are highly recommended to be installed by a professional.